MARTINDALE MM84 Betriebsanweisung PDF herunterladen (Seite 12)

RCD Tester - Residual Current Device Tester

16th Edition / BS 7671 / Part P

RC2000

Supply Voltage: 240 Volts AC,

50/60Hz

RCD Ratings (IΔN): 6 mA, 10mA,

30mA, 100mA, 300mA and 500mA

Half trip settings (½xIΔN): 3mA,

5mA, 15mA, 50mA, 150mA and

250mA

Fast trip settings: 150mA

(for IΔN=6, 10 and 30mA only)

Accuracy: ± 3% at 240V AC Supply

Voltage

Rising Linearly To ±9% at ± 6% of

240V Supply Voltage

Test polarity: 0° and 180°

Timing range: 0 - 1999mSec

(resolution of 1mSec)

Timing accuracy: ±2% of reading

±1 digit

Housing: ABS

Dimensions: 190 x 90 x 54mm

Weight: 350gms approx

Includes: quality soft protective

carry case, batteries, mains test

lead (TL205) & manual

The RCD tester is fast and

easy to use and suitable for

testing all common RCDs up

to 500mA.

The RCD rating (IΔN) is set

using the convenient

centrally located rotary

switch. Three different

currents (full, half and fast

test) are available on one

selector switch, and 0° or

180° (positive/negative half

cycle) can be set on the

second selector switch.

The 6mA range gives this unit

wider application than many

rivals.

10

Loop Tester LP2000

Supply Voltage: 200 to 260V rms,

50/60Hz

Test Current: 24A, rms, for two half

cycles at 240V

Loop Range:

0 to 15Ω nominal in steps of 0.01Ω

15 to 199.9Ω in steps of 0.1Ω

Accuracy: ±2% of reading, ±2 digit

Temperature Coefficient: ±0.1% /°C

Ipsc Range: 0 to 19.99kA in steps

of 0.01kA

Fuse: 5A, HBC, Anti-Surge ceramic,

DIN 5 X 20mm

Transient Protection: VDR at input

Thermal Protection: Electronic

delay

Overvoltage: Category III

Complies with:

EMC: To BS EN 50081-1

BS EN 50082-1

LVD: To BS EN 61010-1

Housing: ABS

Dimensions: 190 x 90 x 54mm

Weight: 400gms approx

Includes: soft protective case,

batteries, mains test lead (TL205),

green wander lead (TL61) & manual

This is a fast and accurate autoranging loop tester.

It can carry out phase earth and phase neutral testing

and it automatically displays PSCC readings. A

wander lead for testing bonded metalwork is also

supplied (TL61).

See pages 14 and 15 for 16th Edition Kits.

This supercedes the Metrohm 16L240P

MARRC2000 rcd tester £294.50

TC2A calibration £27.00

MARTL88 optional 3 way test leads £34.75

MARLP2000 loop tester £275.00

TC2A calibration £27.00

MARTL85 optional 2 way test leads £34.75

MARTL88 optional 3 way test leads £34.75

MARTL205 replacement mains lead £10.00

This supercedes the

Metrohm 16R240A

G

N

N

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare